1996 Subaru Legacy Engine Camshaft Follower Parts

Choose your Submodel for your 1996 Subaru Legacy

Showing 1 - 3 of 3 products

Sort:

Show:

Image

SKU

Product

Rating

Price

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 06/1995-05/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID	Prod. Date Range
1996 - Subaru Legacy	H	2212	4 Cyl 2.2L	Outback	-	Fr:06-00-95 To:05-00-96

6 In Stock

$28.34 CAD

$34.01 CAD

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information:

Vehicle	Sub Model
1996 - Subaru Legacy	LS

6 In Stock

$28.34 CAD

$34.01 CAD

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: -05/1996, 16 per Engine
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
Lash Adjuster

Additional Fitment Information: